Technical Support
Downloadable Drivers
USB 2.0 Serial Adapter (E07-160)
This USB serial adapter is a Plug and Play device—restart the power of your system and wait until it go to the idle state (eg: after it's all powered up and the initializing software is executed) then plug this adapter into any available USB port. The system should automatically install the driver for you. While in self-start mode, the lower right hand side of the installation screen will display "Found new device", "Installing new driver", "Driver for new device is successful installed", or something similar, usually taking about 2-3 minutes to finish. If your system cannot self install the driver, then you can manually download the correct driver below for installation.
Prolific PL2303-TA chipset—up to Windows 8
- Windows 98, 2000 (SP4), Me (32 and 64-bit), XP (SP2+), Server 2003, Vista, Server 2008, 7, 8, Server 2012
- MacOS X 10.1+ for PowerPC-based Macs, OS X 10.4 & 10.5 for PowerPC & Intel-based Macs, OS X 10.6 for Intel-based Mac, OS 8 & 9
- Linux for RedHat 7.3/8.0/9.0 (driver pre-built in on Linux Kernel 2.4.10+ & 2.4.31+)
- L2303 Android USB Host API SDK, MTTTY for "Serial Communication in Win32"
Prolific PL2303-HXA chipset (retired in 3/2013)—(up to Windows 7)
- Cable Routine Test (2 serial ports communicating via null modem cable/adapter)
- Windows 98, 2000 (SP4), Me (32 and 64-bit), XP (SP2+), Server 2003, Vista, Server 2008, 7 (not compatible with Windows 8)
USB 2.0 Dual Serial Adapter (E07-162)
This USB serial adapter is a Plug and Play device—restart the power of your system and wait until it go to the idle state (eg: after it's all powered up and the initializing software is executed) then plug this adapter into any available USB port. The system should automatically install the driver for you. While in self-start mode, the lower right hand side of the installation screen will display "Found new device", "Installing new driver", "Driver for new device is successful installed", or something similar, usually taking about 3-5 minutes to finish installation for two serial ports. If your system cannot self install the driver, then you can manually download the correct driver below for installation.
MCS7820 chipset
Knowledge Base
- How to terminate a Cat6A patch cable
- Typical application for HDMI Extender (M05-180)
- Illustrated glossary of DVI connectors
- Illustrated glossary of networking cable connectors
- Illustrated glossary of PC cable connectors
- Illustrated glossary of power cable connectors
- Illustrated glossary of SCSI cable connectors
- Illustrated glossary of SAS (Serial Attached SCSI) and SATA cable connectors
- Illustrated glossary of A/V cable connectors
- Illustrated glossary of USB FireWire cable connectors